Menu

Radiateur d’huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R September 8, 2022

Radiateur_d_huile_surdimensionne_H2O_pour_Ducati_748_916_996_998_Monster_S4R_01_if Radiateur d'huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R
Radiateur d'huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R
Radiateur d'huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R
Radiateur d'huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R
Radiateur d'huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R

Radiateur d'huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R
Water radiant mass increased by 40mm thickness, conduit “u”. Oil radiant mass increased by 30mm thickness. Assembly kit including silicone and aluminum tubes “y”, water extraction flanges. At the base of engine cooling. During normal use of the motorcycle, the engine generates a large amount of heat, when it reaches about 85 degrees Celsius it is on the threshold from which the engine begins to lose performance, over 118 degrees the engines begin to lose power (up to 6/7 horses) and there is a risk of irreversible damage. In fact, in the race most of the engine failures occur due to insufficient cooling of the same. The functioning of an aluminum radiator. The purpose of a radiator is to cool the engine through a coolant. Through a well studied path inside the radiator structure the liquid dissipates the heat through the use of fins and a series of internal pipes. Why an aluminum race radiator. The standard radiators of the series are not designed for the high amount of work to which the engine is subjected in the race. H2O aluminum radiators are designed to overcome this shortcoming, keeping the engine cool and preserving it from breakage caused by overheating. The radiators for straddle applications are designed for certain working ranges at the most accessible possible cost, not suitable for the race regimes for which the stresses due to the use of the engine always almost to the limit. To keep costs down, OEM radiators are designed keeping the number of tubes (More expensive) and increasing the number of cooling fins (Much cheaper). H2O does the exact opposite designing its cooling radiators with a high number of pipes and fewer fins, also limiting dirt and debris that normally fit inside, obviously decreasing its efficiency. The sturdiness of the product is born in the welding of the tubes to the trays, avoiding the gluing the H2O aluminum radiator will certainly be more long-lived and robust. The use of aluminum and construction technology make it much lighter than an original radiator. This item is in the category “Auto, moto – pièces, accessoires\Moto: pièces détachées\Refroidissement moteur\Refroidisseurs d’huile”. The seller is “omnia-racing” and is located in this country: IT. This item can be shipped worldwide.
  • Marque: H2O Performance
  • Numéro de pièce fabricant: Art. 104

Radiateur d'huile surdimensionné H2O pour Ducati 748/916/996/998/Monster S4R
Comments Off

Radiateur d’huile surdimensionné H2O pour Ducati Hypermotard August 30, 2022

Radiateur_d_huile_surdimensionne_H2O_pour_Ducati_Hypermotard_01_pk Radiateur d'huile surdimensionné H2O pour Ducati Hypermotard
Radiateur d'huile surdimensionné H2O pour Ducati Hypermotard
Radiateur d'huile surdimensionné H2O pour Ducati Hypermotard
Radiateur d'huile surdimensionné H2O pour Ducati Hypermotard
Radiateur d'huile surdimensionné H2O pour Ducati Hypermotard

Radiateur d'huile surdimensionné H2O pour Ducati Hypermotard
Oil radiant mass increased by 30mm. At the base of engine cooling. During normal use of the motorcycle, the engine generates a large amount of heat, when it reaches about 85 degrees Celsius it is on the threshold from which the engine begins to lose performance, over 118 degrees the engines begin to lose power (up to 6/7 horses) and there is a risk of irreversible damage. In fact, in the race most of the engine failures occur due to insufficient cooling of the same. The functioning of an aluminum radiator. The purpose of a radiator is to cool the engine through a coolant. Through a well studied path inside the radiator structure the liquid dissipates the heat through the use of fins and a series of internal pipes. Why an aluminum race radiator. The standard radiators of the series are not designed for the high amount of work to which the engine is subjected in the race. H2O aluminum radiators are designed to overcome this shortcoming, keeping the engine cool and preserving it from breakage caused by overheating. The radiators for straddle applications are designed for certain working ranges at the most accessible possible cost, not suitable for the race regimes for which the stresses due to the use of the engine always almost to the limit. To keep costs down, OEM radiators are designed keeping the number of tubes (More expensive) and increasing the number of cooling fins (Much cheaper). H2O does the exact opposite designing its cooling radiators with a high number of pipes and fewer fins, also limiting dirt and debris that normally fit inside, obviously decreasing its efficiency. The sturdiness of the product is born in the welding of the tubes to the trays, avoiding the gluing the H2O aluminum radiator will certainly be more long-lived and robust. The use of aluminum and construction technology make it much lighter than an original radiator. This item is in the category “Auto, moto – pièces, accessoires\Moto: pièces détachées\Refroidissement moteur\Refroidisseurs d’huile”. The seller is “omnia-racing” and is located in this country: IT. This item can be shipped worldwide.
  • Marque: H2O Performance
  • Numéro de pièce fabricant: Art. 102

Radiateur d'huile surdimensionné H2O pour Ducati Hypermotard
Comments Off

Radiateur Huile Authentique Pour Ducati M. S2r-Gt1000-SS1000 / Paul Smart. Cod January 13, 2022

Radiateur_Huile_Authentique_Pour_Ducati_M_S2r_Gt1000_SS1000_Paul_Smart_Cod_01_jlq Radiateur Huile Authentique Pour Ducati M. S2r-Gt1000-SS1000 / Paul Smart. Cod

Radiateur Huile Authentique Pour Ducati M. S2r-Gt1000-SS1000 / Paul Smart. Cod
Radiateur Huile Authentique Pour Ducati M. S2r-Gt1000-SS1000 / Paul Smart. Cette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. Refroidisseur d’huile d’origine. Pour Ducati Monster S2r-800/1000. Article nouveau et facturable!!! A partir du 1er janvier 2021, articles vendus en Angleterre. VEUILLEZ NOTER QUE depuis le 1er janvier 2021. Les envois vers le Royaume-Uni sont soumis à des frais de douane. N’oubliez pas de m’ajouter à votre liste de favoris. Refroidisseur d’huile d’origine pour Ducati Monster S2r-800/1000 GT1000- SS1000-800 Paul Smart la morue 54840303A Article nouveau et facturable!!!! N’oubliez pas de m’ajouter à votre liste de favoris! This item is in the category “Véhicules et pièces\Pièces et accessoires\Motocyclette – pièces\Refroidissement moteur\Refroidisseurs d’huile”. The seller is “victorysrl” and is located in this country: IT. This item can be shipped worldwide.
  • MPN: 54840303A
  • Brand: – Sans marque/Générique -
  • Marque du véhicule: Ducati
  • Marque: Ducati
  • Numéro de pièce fabricant: 54840303A

Radiateur Huile Authentique Pour Ducati M. S2r-Gt1000-SS1000 / Paul Smart. Cod
Comments Off

Tuyau Huile Tête Inox pour Ducati 748-888-916-996 -monstre S4- ST4 COD 96805494B January 5, 2022

Tuyau_Huile_Tete_Inox_pour_Ducati_748_888_916_996_monstre_S4_ST4_COD_96805494B_01_tkiv Tuyau Huile Tête Inox pour Ducati 748-888-916-996 -monstre S4- ST4 COD 96805494B
Tuyau Huile Tête Inox pour Ducati 748-888-916-996 -monstre S4- ST4 COD 96805494B

Tuyau Huile Tête Inox pour Ducati 748-888-916-996 -monstre S4- ST4 COD 96805494B
Tuyau Huile Tête Inox pour Ducati 748-888-916-996 -monstre S4- ST4 COD 96805494B. Cette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. Tuyau d’huile de tête en acier inoxydable. Article nouveau et facturable!!! N’oubliez pas de m’ajouter à votre liste de favoris. Tuyau d’huile de tête en acier inoxydable Pour Ducati 748-888-916-996 -Monstre S4-ST4 la morue 96805494B Article nouveau et facturable!!!! N’oubliez pas de m’ajouter à votre liste de favoris! Codice ricambio originale OE/OEM. This item is in the category “Véhicules et pièces\Pièces et accessoires\Motocyclette – pièces\Refroidissement moteur\Refroidisseurs d’huile”. The seller is “victorysrl” and is located in this country: IT. This item can be shipped worldwide.
  • MPN: 96805494B
  • Brand: – Sans marque/Générique -
  • Marque du véhicule: Ducati
  • Marque: Fren Tubo
  • Code rechange originel OE/OEM: 96805494B
  • Numéro de pièce fabricant: 96805494B

Tuyau Huile Tête Inox pour Ducati 748-888-916-996 -monstre S4- ST4 COD 96805494B
Comments Off